Brushless Gimbal Electronics

You cannot add "STorM32 WiFi NT Logger Module (beta)" to the cart because the product is out of stock.

Showing all 8 results

Brushless Gimbal Electronics
ENSYS SToRM32 V3.3 Board (Beta)
50.00€
This SToRM32 3.3 Board is compatible with OlliW SToRM32 3.3 Design and v3.3 Firmware. This board has no motor drivers; NT motor modules need thus…

Read more
Brushless Gimbal Electronics
StorM32 NT Motor Module v3x
35.00€
Very compact 3 motor driver for Storm32 NT system. It features a DC-DC converter which stabilizes the voltage to 10V for 3x STSPIN233 motor driver…

Read more
Brushless Gimbal Electronics
StorM32 NT Motor Module v2.50E SQ [GD32]
20.00€
This is a slightly modified design based on OlliW v2.50E SQ board layout. All the features documented in the Storm32 project are available. Specifications: MCU:…

Read more
Brushless Gimbal Electronics
STorM32 NT IMU Module v4
14.00€
Specifications: IMU Input voltage: 3 – 12 V. Compatible with StorM32 version: 2.03-NT and higher. Board dimensions: 11.7mm x 17.5mm x 2mm. Sensor: LSM6DS3 Oversampling…

Select options
Brushless Gimbal Electronics
StorM32 NT Motor Module v2
12.00€
Specifications: Input voltage: 7 – 18 V Driver chip: DRV8313 PWM Control Frequency: 32khz RMS Output Current (A): 1.75A RDS(ON) (HS + LS) (mOhms): 480…

Read more
Sale!
Brushless Gimbal Electronics
STorM32 WiFi NT Logger Module (beta)
Original price was: 12.00€.Current price is: 10.00€.
Please note: This is a beta product and it may contain some bugs or issues, so if you are experiencing any issues or have some…

Read more
Sale!
Brushless Gimbal Electronics
StorM32 Li-x LED Battery Monitor
Original price was: 8.00€.Current price is: 6.00€.
This is a LED battery monitor which uses STorM32 controller’s UART port to retrieve battery voltage and display the state of charge using LEDs. This…

Add to cart
Brushless Gimbal Electronics
Adjustable Micro Switching Step-Down Voltage Regulator (5V-28V Input range)
5.50€
Warning: For safety, before use, please verify output voltage with a multimeter. Specification: Input voltage: 5V-28V Output Voltage: 3V-20V (adjustable) Output current: rated current 3A(MAX). Switching…

Read more